Back at Computex this summer time, we had a sneak peek at TeamGroup’s newest T-Force AIO liquid cooler, designed to be used with PCIe 5.0 SSDs. Now, the Siren GD120S AIO SSD cooler is nearing launch, promising to maintain your speedy SSD far under the thermal throttling level below load.
When below excessive load, PCIe 5.0 SSDs are inclined to run fairly scorching. More typically than not, you will be utilizing passive cooling to maintain these SSDs in test however TeamGroup has a probably extra performant choice on the best way. The T-Force Siren GD120S AIO SSD affords a 120mm AIO liquid cooler on your SSD, which is able to assist delay lifespan and preserve the drive from thermal throttling. According to the corporate, this AIO cooler ought to preserve PCIe 5.0 SSDs below 54°C, properly under the thermal throttling level.
The cooler encompasses a dual-tube water block product of aluminium alloy with double-layered thermal pads, which allows the SSD controller chip and IC to be securely hooked up to the copper cooler basis. In addition, the pump additionally has three silent motors and a ceramic shaft development to make sure a quiet and regular operation.
To effectively cut back the excessive temperatures produced by M.2 PCIe 5.0 SSDs, the T-Force Siren GD120S AIO SSD cooler has a 120mm radiator with 13 high-density aluminium fins to increase the cooling floor, in addition to a 12cm ARGB PWM fan. The cooler ought to be out there in December 2023.
KitGuru says: Would you go for an AIO cooler for a PCIe 5.0 SSD or does a silent heatsink do the job for you?
