Home » DeepCool’s Assassin IV exhibits itself in South Korea

DeepCool’s Assassin IV exhibits itself in South Korea

by Genzo
0 comment
Assassin IV


Via the South Korean media QuasarZone we’ve entry to the specs and official images of the following large fan from DeepCool. Yes, the Assassin IV is unveiled in Asia and it’s not a giant deal. Clearly, it’s a neat and high-end product!

Assassin IV: the cooler is unveiled in South Korea!

Assassin IVAs a reminder, at DeepCool, the Assassin sequence represents the top quality of the model by way of aircooling heatsinks. This fourth technology will likely be no exception. The design is once more very neat with many fairings.

Nevertheless, it is usually a dual-tower heatsink that gives a low influence on the reminiscence. To obtain this, the second fan of the model shouldn’t be mounted on the entrance in push, however on the rear in pull. To do that, the blades are mounted “the other way up” to offer the absolute best efficiency!

This time, the technical information sheet is thought and we all know that this mannequin will measure 144 (W) x 147 (H) x 164 (H) mm. Moreover, will probably be an actual heavyweight because it weighs 1575 g on the dimensions… Outch! Finally, the 2 cooling towers are crossed by a complete of seven copper warmth pipes of 6 mm every. Also, on the images, the bottom appears to be off-center on the aspect in an effort to restrict the influence on the primary PCIe of the motherboard.

To make sure the air flow, we discover two mills, one in 120 mm, the second in 140 mm. They will have the ability to flip in two modes of operation: quiet and efficiency. The choice is made through a swap instantly built-in into the cpu cooler. Anyway, by way of pace, airflow and static strain, the model mentions :

  • Performance:
    • Speed: from 500 rpm to 1700 rpm
    • Airflow: 79.1 CFM (140 mm), 58.06 CFM (120 mm)
    • Static strain: 2.44 mmAq (140 mm), 2.1 mmAq (120 mm)
  • Quiet:
    • Speed: 500 rpm to 1350 rpm
    • Airflow: 63.76 CFM (140 mm), 46.75 CFM (120 mm)
    • Static strain: 1.58 mmAq (140 mm), 1.35 mmAq (120 mm)

As for compatibility, this can be a mannequin that can mount on Intel platforms in LGA-1000 and LGA-2000. On the AMD aspect, we discover help for AM4 and AM5 motherboards. Finally, we all know that this cooling unit can dissipate as much as 280W!

You may also like

Leave a Comment