The 12VHPWR is a tough connector to tame, since as quickly because it appeared, graphics playing cards began to burn. Then got here CableMod with its cable extensions and adapter. Even the corporate specializing in energy cables couldn’t include the ardor of this new connector! This time, the model provides it one other attempt with 90° and 180° adapters v1.1.
12VHPWR v1.1: CableMod tries to tame the connector… Once once more!
CableMod pronounces a brand new model of its well-known adapter. Version 1.1 comes with a variety of enhancements. The first of those is to supply a 12V-2×6 connector, relatively than the basic basic connector. If you keep in mind, the latter is safer than the unique mannequin, because of shorter sign pins and barely longer energy pins. This prevents the PC from beginning up if the connector isn’t pushed in far sufficient, because the sign pins not make contact. On the facility facet, overheating is decreased thanks to higher contact on the pins that carry the present.
New revised angled adapters accessible now!
What does the v1.1 convey to the desk?
– CEM 5.1 customary feminine connector;
– Improved tightness on the male connector;
– Removed wiggle between PCB and male connector.Global: https://t.co/vpn6NaP44z
EU: https://t.co/jrbCxsvSn1 pic.twitter.com/pdDolt25nd— CableMod (@CableMod) September 26, 2023
Otherwise, the opposite two enhancements made by the model are mechanical. CableMod pronounces:
- The male connector will likely be additional tightened.
- Lateral play on the adapter will likely be eradicated.
These are the 2 important faults that plagued the earlier model. Once plugged in, the pressure exerted by the facility connector meant that the adapter may not be sufficiently depressed. And if the 12VHPWR isn’t correctly inserted, we all know what the implications could be!
