Home » Review: Ssupd Meshroom S – Overclocking.com

Review: Ssupd Meshroom S – Overclocking.com

by Genzo
0 comment
Ssupd Meshroom S


After having examined the Corsair 2000D Airflow, we now transfer on to a brand new case check. Last 12 months, the Ssupd model launched a brand new ITX case mannequin, the Meshroom S. After lengthy months of ready, it has now arrived on the editorial workplace in its blue model for a full check. Are you prepared? Here we go!

Ssupd Meshroom S

The Meshroom S exterior:

Once once more, we’re coping with a monolithically styled case. What units it aside, nonetheless, is the huge use of steel mesh… It’s completely all over the place: on the entrance, prime and sides. Nonetheless, we just like the type, the visuals are sober and the case will mix seamlessly into your inside, be it lounge, private or skilled workplace. In any case, it’s not a gaming case, removed from it.

We now transfer on to some technical information, comparable to dimensions. Naturally, we’re coping with a really compact case measuring 167 (W) x 247 (D) x 362 (H) mm. Compared to the 2000D, we’re coping with a extra compact, shallower and decrease physique. Otherwise, as for weight, we’re at 3.2 kg on the scales, so it’s not a lot to fret about. That’s one of many benefits of this format in our opinion: compact, light-weight machines, no less than in comparison with mid-tower PCs.

The management panel:

Ssupd Meshroom S panneau de contrôle

The management panel of this Meshroom S takes up area on the highest of the case and options:

  • Two USB-A 3.2 Gen1 connectors
  • One USB-C 3.2 Gen2 connector
  • And that’s all there may be to it

As you possibly can see, the management panel is minimalist, with no 3.5 mm jack or energy button, and for good motive… Ssupd has positioned it on the rear of their case. But we’ve bought no less than two USB-As to plug in no less than two USB sticks.

The underside :

Ssupd Meshroom S dessous

Underneath the case, to start with, we discover the Meshroom S‘s toes within the type of small rubber pads. There are additionally a variety of openings for entry to the graphics card connectors. Otherwise, we discover the presence of a number of rubber washers whose positioning strongly resembles 2.5″ SSD/HDD slots.

Rear:

Ssupd Meshroom S arrière

The rear of this mannequin resembles nothing we’ve ever seen earlier than, as the highest left options three inverted full-height growth slots. As you’d anticipate, we’ll have the ability to set up a triple-slot graphics card. Just beneath, there’s a air flow grille and a small opening on the very backside.

On the opposite facet is the motherboard’s I/O defend connector slot, with the ability button simply above it. Finally, on the very backside, we now have the suitable to the ability provide slot, which might be in ATX or SFX format.

The prime :

Ssupd Meshroom S dessus

Apart from the management panel, there’s nothing particular in regards to the prime of the case, aside from a mesh grille. In principle, scorching air isn’t constrained and will escape pretty simply.


You may also like

Leave a Comment