Home » Corsair May Transfer the Connectors Round on an Upcoming PSU

Corsair May Transfer the Connectors Round on an Upcoming PSU

by Genzo
0 comment


This web site might earn affiliate commissions from the hyperlinks on this web page. Phrases of use.

Since homo sapiens started to stroll upright, PC energy provides have used just about the identical structure. The ability cable from the wall goes in a single facet, and the connectors are on the opposite facet, going through towards the entrance of the chassis. This has labored out properly, as that structure is appropriate with the ATX customary. Nonetheless, it may create a rat’s nest of cables on the backside of the chassis, which is why many case producers have begun placing a shroud over the PSU. Now Corsair appears to be attempting a special method to tidying up case wiring: shifting the connectors to the facet of the PSU.

Photos of this new fashion of energy provide have been posted to Twitter by the dependable leaker Momomo_us. The product is appropriately named Shift, and it might sign a brand new household of energy provides from Corsair. Or probably, the corporate will supply its conventional lineup of PSUs however embrace a “Shift” variant as properly.

Corsair will reportedly offer three variations: 850W, 1000W, and 1200W. The brand new location for the connectors would have them pointing straight out in direction of the facet panel although. That might make it simpler so as to add or subtract a cable on-the-fly, as PC Gamer factors out. Because it stands now, it may be extremely troublesome to entry the connectors in a totally constructed system. Your humble writer simply went by means of this and needed to dismantle most of my PC simply so as to add a brand new PCIe energy cable for a GPU improve. Nonetheless, it looks as if type of a messy method if the purpose is to cover cables, and in addition one that may not work in lots of ATX circumstances.

The connection choices on the 1000W mannequin. (Picture: @momomo_us)

We might see this working properly in a case that has a cutout particularly for this orientation however going through the opposite path. That’d allow you to hold all of the cables snaked behind the motherboard, poking by means of cutouts and into your elements. Some ATX circumstances have already got the sort of structure, however most don’t. It could permit for a clear look when peering by means of the facet panel.

It’s even doable Corsair will produce circumstances appropriate with the structure. The overwhelming majority of its present chassis choices embrace a shroud over the PSU space. That sort of canopy appears incompatible with energy cables going towards the facet panel. Perhaps it’s engaged on a line of Shift chassis which are targeted on cleaner wiring.

This picture is the one one with seen Shift branding on it. (Picture: @momomo_us)

For now, we don’t know if that is even an actual product. You continue to should be leery of what you see on Twitter, and there’s additionally one factor that’s bothering us. The poster says it’s an Intel ATX 3.0 energy provide, however there’s no 12VHPWR connector. We suppose it’s doable it makes use of an adapter, equivalent to two-into-one, however that appears unlikely as folks need assist for it natively with out adapters.

Regardless, we hope it’s actual as a result of it’s excessive time for some new pondering in the case of how we wire our PCs. It’s by no means been straightforward to make the wiring clear, however merchandise like this would possibly make it only a tad bit much less of a PITA, assuming there’s circumstances that work with it too.

Now Learn:



You may also like

Leave a Comment